Flame Retardant Belts
USAGE AREAS
Flame Reatardent Belts are used in underground mines, in flammable environments and in factories that produce special products.
FEATURES
• They are produced using chlorine based products.
• They are divided into 2 categories : for underground and for opencast/surface usage.
• Produced for opencast mining in accordance with the TS EN 12882 norm.
• Produced for underground mining in accordance with TS EN 14973 norm.
• They exhibit flame resistance and are generally used for this purpose.
• They are resistant up to 80C operating temperature.
|
CLASS |
ELASTOMER |
CONTINUOUS WORKING TEMPERATURE |
ABRASION (mm3) (TS ISO 4649 METHOD-A) |
HARDNESS (SHORE A) (TS EN ISO 868 |
TENSILE STRENGTH (Mpa) (TS ISO 37 TYPE-3) |
USAGE AREA | FLAMMABILITY STANDARDS |
|---|---|---|---|---|---|---|---|
| TYPE-K (2A) | CR/SBR | -30 C° -+ 80 C° | 170 | 66±5 | 16 Mpa | Above Ground |
TS EN ISO 340 TS EN 12882 |
| TYPE-S (2B) | CR/SBR | --30 C° -+ 80 C°C | 170 | 66±5 | 16 Mpa | Above Ground |
TS EN ISO 340 TS EN 12882 |
| TYPE-K (3A) | CR/SBR | -30 C° -+ 80 C° | 220 | 66±5 | 15 Mpa | Above Ground | TS EN ISO 340 TS EN 12882 TS EN ISO 20238 |
| TYPE-S (3B) | CR/SBR | -30 C° -+ 80 C° | 220 | 66±5 | 15 Mpa | Above Ground | TS EN ISO 340 TS EN 12882 TS EN ISO 20238 |
| V-C1 | CR | -30 C° -+ 80 C° | 175 | 70±5 | 17 Mpa | Underground | TS EN 14973 TS EN ISO 340 EN ISO 12881-1 TS EN ISO 20238 |
| V-A1 | CR | -30 C° -+ 80 C° | 175 | 70±5 | 17 Mpa | Underground | TS EN 14973 TS EN ISO 340 EN ISO 12881-1 TS EN ISO 20238 |
| L-C1 | CR | -30 C° -+ 80 C° | 200 | 70±5 | 15 Mpa | Underground | TS EN 14973 TS EN ISO 340 EN ISO 12881-1 TS EN ISO 20238 |
| L-A1 | CR | -30 C° -+ 80 C° | 200 | 70±5 | 15 Mpa | Underground | TS EN 14973 TS EN ISO 340 EN ISO 12881-1 TS EN ISO 20238 |
