Working Hours : Mon. - Fri. 09:00 - 19:00 (GMT +3)

Rubber Sheets

Rubber Sheets

RUBBER SHEETS
Rubber-based rubber sheet is a flexible material that is vulcanized from the combination of natural rubber, synthetic rubber and special chemical mixtures, used in the construction of gaskets, which are interconnected and sealed between the surfaces of two compressed parts. Its resistance can be increased even more by putting carcass material inside for some special purposes.

RUBBER SHEET WITH OR WITHOUT FABRIC
They are produced in various thicknessses from 1 mm to 25 mm. They are used in floorings, water and sewage piping gaskets, sealing elements, gasket requirements, places requiring isolation and insulation and wherever which is relevant. Standard production is at 1000 mm width x 2000 mm length dimensions, altough customized dimensions can be produced when required

NEOPRENE RUBBER SHEET
Abrasion value is less then the other rubber sheets. Its greatest property is flame resistance. It is resistant to petroleum based oils, sunray, ozone and oxygen.

NITRILE RUBBER SHEET
Nitrile rubber sheet is highly resistant to oil and petroleum derivatives. It is durable to 200 kg / cm2 pressure with normal formulation. It can elongate by 370%. It has high resistance to friction. It is not easy to tear. It can be easily used at temperatures between -15 ° C and 110 ° C. This temperature can be increased up to 130 ° C using special formulas.

EPDM RUBBER SHEET
It is used in environments where hot materials are used. They are resistant to temperatures from - 50°c to 160°c. It has high resistance to acid, oxygen and water.

DIELECTRIC RUBBER SHEET (DIELECTRIC INSULATION RUBBER MAT)
Die-electric Rubber Shhets have electrical insulation beside their essential feature of abrasion resistance. Although dielectric sheets are mainly produced for 15.000 volts in 3 mm and 30.000 volts in 5 mm thickness, but according to  requirement s they can also be produced resistant to higher volts. Die-lectric Rubber Sheets are produced and tested in accordance with TS EN 61111 standards.They are used in power plants, transformer centers, and all kind of working environments with low or high voltage